Sheboygan County · Same-day when we can
Furnace repair in Sheboygan County.
No heat, short cycling, or a noise that started last night. Tell us what it's doing and we'll tell you what it costs before we touch it.
- Carrier Factory Authorized Dealer
- NATE-certified technicians
- Locally-owned since 2008
- We service every brand
How we work
Six things that decide whether a repair call goes well
You get the price before the work
We diagnose, then quote. You approve the number before a wrench moves. No surprises written up after the fact.
We check incoming voltage first
Most shops skip this. Line voltage in parts of the county runs near the top of the legal range, and that quietly kills the electronics in modern furnaces. If that is what is eating your boards, a new board alone will not fix it.
We tell you when not to repair
If the repair is most of the way to a replacement on a furnace with a few years left, we will say so and show you the arithmetic. Talking you into the wrong repair costs us the next job.
We work on what you already own
Carrier is what we install, but we repair every major brand. You do not need to have bought it from us.
Parts on the truck for the common failures
Igniters, flame sensors, pressure switches, capacitors, inducer motors. The failures that account for most no-heat calls get fixed on the first visit.
Boots off, drop cloth down
It is your house. We leave the mechanical room cleaner than we found it and tell you what we changed.
What we get called for
Four calls we take every week in January
If your furnace is doing one of these, you are not the first person this week.
No heat at all
Failed igniter, dirty flame sensor, tripped limit switch, or a control board that has given up. Usually a same-visit fix.
Get it looked at
Short cycling
Runs a few minutes, shuts off, starts again. Often airflow — a clogged filter or a closed-down duct system — but it can also be an oversized furnace.
Get it looked at
New noises
A scrape is usually the blower wheel. A boom on ignition means delayed ignition and should be looked at now, not in spring.
Get it looked at
Repairs stacking up
Third call in two winters on a furnace past fifteen years is a replacement conversation, not a repair one. We will show you both numbers.
Replacement optionsThe honest question
Repair it, or replace it?
There is no single rule, but these six lines decide most of it. If your answers sit mostly in the right-hand column, a repair is buying you months, not years.
| What we look at | Lean toward repair | Lean toward replace |
|---|---|---|
| Age of the furnace | Under 12 years | 15 years or more |
| Cost of this repair | Under a third of a new system | Half or more of a new system |
| Repairs in the last two years | This is the first | Second or third |
| Heat exchanger | Sound | Cracked — replace, no debate |
| Energy bills | Steady year to year | Climbing with no change in habits |
| How long you're staying | Moving within a couple of years | Staying put |
A cracked heat exchanger is the one row with no judgment call in it. That furnace gets shut off and replaced — it is a carbon monoxide risk, not an efficiency problem.
Straight answers
Furnace repair questions we actually get
How fast can you get here when there's no heat?
During business hours we work no-heat calls ahead of everything else and can usually reach you the same day. Outside hours, (920) 564-2333 reaches our on-call technician. In a Wisconsin cold snap every HVAC company in the county is triaging at once, so call early rather than waiting to see if it sorts itself out.
What does a furnace repair cost?
It depends entirely on the part. A flame sensor cleaning is at the low end; an inducer motor or control board is considerably more. What we can promise is the sequence: we diagnose, we give you a written price, and you decide. You will never get an invoice with a number on it you have not already agreed to.
Do you charge a diagnostic fee?
Yes — there is a charge for the visit and the diagnosis, and we will tell you what it is when you book. If you go ahead with the repair, it is folded into the job.
Will you work on a furnace you didn't install?
Yes. We install Carrier, but we repair every major brand — Trane, Lennox, Goodman, Rheem, Bryant, Amana and the rest. Most of the furnaces we service were put in by somebody else.
My furnace keeps blowing control boards. Why?
This is worth taking seriously. If a furnace has eaten more than one board, the usual culprit is not the board — it is the power feeding it. Incoming line voltage in parts of Sheboygan County sits near the top of the legal range, and modern variable-speed equipment is far less tolerant of that than the furnaces it replaced. We measure incoming voltage as part of the diagnosis, and if that is the problem we will talk about monitoring and surge protection rather than selling you a third board.
Is a cracked heat exchanger really that serious?
Yes. A cracked heat exchanger can let combustion gases, including carbon monoxide, into the air you breathe. If we find one we shut the furnace down and tell you straight. It is not a repair — it is a replacement, and it is the one case where we will not offer you a cheaper path.
Can I do anything before I call?
Three things worth thirty seconds each. Check the thermostat is calling for heat and its batteries are good. Check the furnace switch — it looks like a light switch on or near the unit — has not been flipped off. Check the filter is not completely clogged, because a blocked filter will trip the limit switch and shut the furnace down. If all three are fine, call us.
Does a maintenance plan actually prevent repairs?
It prevents some of them, and it catches others while they are still cheap. A flame sensor cleaned in October is a tune-up line item; the same sensor failing in January is a no-heat call. It will not stop a twenty-year-old blower motor from dying. Here is what our plans cover.
Cold house? Let's get it running.
Tell us the make, roughly how old it is, and what it's doing. That is usually enough for us to know what we're walking into.
Or call us directly
(920) 564-2333Mon–Fri 7am–3pm. After hours, the same number reaches our on-call technician.